MBGP-3EP is GSM/GPRS converter, capable to work with 4G networks. It can serve in two basic ways:
- as a bridge between m-bus/RS-232 networks and central server;
- as a pulse counter with GPRS data transfers
Device has 4 standard pulse inputs, suitable for reed-switch or open collector, RS-232 interface and 4G GSM module inside.
It is powered by external DC adapter, included in the package. It also comes with GSM antenna and all needed cables. Can be set up
locally via RS-232 or remotely through GSM/GPRS network, using our free software. Mounted on a horizontal or vertical surface,
DIN-rail mounting available on request.
user
manual
work frequency |
QUAD BAND (EGSM 850/900/1800/1900 MHz) |
network type |
4G |
number of data operators |
up to 4 |
number of control operators |
2 (control and manufacturer) |
display |
2 status leds |
power supply |
12/24 Vdc, 1.0A |
power consumption |
< 5 W |
humidity |
40 ÷ 90 % |
work temperature |
from -20° C to +55° C |
storage temperature |
from -50° C to +90° C |
dimensions (HxWxD), mm |
125/70/30 mm (w/o antenna) |
protection class |
IP30 |
own weight |
100 g |
For correct operation a SIM-card must be inserted in MBGP-3EP,
with activated GPRS service. Access parameters (such as
PIN, PUK, access point name, user name, password) must be
programmed in MBGP-3 memory - we offer free software for
this purpose. Using this software also can be set the following
parameters:
- IP (v4) of at least one data operator, with his access
level
- IP (v4) of control operator and manufacturer (can
be identical either to each other or with data operator),
and all following set-ups can be made via GPRS by these
two operators
- data sending time period
- time for sending reading request
These parameters can be re-programmed at any time (excluding
SIM-card parameters) from control operator. Reading command
is initiated by MBGP-3EP instead by the server, because that
way the user has mobile operator independence and can choose
from every available GSM operator with GPRS service.